Detailed Product Description

Changzhou Sunhome Water Heater Co., LTD

Ally Qin

Cell:+86 1340 169 1567

Features:
1) No water in the tube so it never crack easily and never fur up
2) Stand up to freezing below -50degrees
3) Needs only temperature difference, sunshine is unnecessary, high heat conduction
and will never hibernate
4) Ultra low temperature molecule vaporizing conduction (vaporizing point of the medium
in the pipe is -38 degrees)
5) Low heat capacity and fast warming-up, heat output power is above 120W , fast conduction can be measured by second and is 1000 times of copper, conduct heat effectively even under non-sunshine weather
6) Even one of the pipes is cracked, the machine works as well as usual because each pipe works independently.
7) Tri-layer vacuum protect heat from losing, good one-way conduction have effective heat preservation
8) Heat pipe is free from water flow, which ensures cleaner water
9) Heat pipe keep earth sediment away, realizes everlasting high heat efficiency
10) It an produce more hot water than the general types
11) All the merits listed above ensure low maintenance cost during the product life

Product Specifications:

Advantages of pressurized solar water heater then non pressurized solar water heater:
1) Solve the problem of non-pressure solar water heaters zero pressure hot water output
2) Solve the problem of inconstant water thermoregulation caused by maladjustment of nature fall pressure of non-pressure solar water heater and cold water pressure change of tap water
3) The water capacity in water tank keeps constant in use in order to avoid the empty heating while the heat storage tank falling fetching water
4) The heat storage water tank seldom feed water to avoid repeat operating complicated water feed problems every day

Specifications:
Inner tank: Pressurized food grade SUS304/2B stainless steel with 0.50mm thickness
Outer tank: SUS304-2B stainless steel with optional 0.40mm thickness
Copper coil: TU1red copper, diameter 12mm, thickness 0.80mm
Water capacity: 200L, 300L
Pressure: 0.6 MPA
Heat preservation: 80-90hours
Hail resistance: 28mm
Tube standards: 20, 30 borosilicate glass 3.3 tubes with 58mm diameter and 1.80M length;
Absorptive rate: more than 96% (AM1.5)
Stagnation temperature: 270-300 degree
Freezing resistance: -50 degree
Heat insulating layer: improved polyurethane integral foaming with thickness 60mm
Frame: stainless steel SUS304/2B with optional 0.55mm, thickness
Fasteners: stainless steel screws
Seal: imported silicone rubber polymer ringing to connect and seal them

Pressurized solar water heater principle
High pressurized solar water heater stand alone model is a new type of solar water heater which adopts advanced copper heat pipe and all glass vacuum tube Technology. Highly efficient vacuum tube absorbs heat from sunlight and heat pipe transfers heat to the condenser end of itself. Condenser indirectly contacts with water through a copper cap and it boils water by releasing heat gained from vacuum tube. The cooper and winding pipe increase the costs, but bring stronger heat exchange ability. The temperature of water tank and heat exchange area of winding pipe can be adjusted to keep the continued bath requirement.